Electro Art Sensor

Cylinder Position Sensor

Specifications:
Model MR 01 MR 02 MR 03 N MR 03 P MR 04
Cable 2 Core Wire 2 Core Wire 3 Core Wire 3 Core Wire 2 Core Wire
Cable Length 2 Meters 2 Meters 2 Meters 2 Meters 2 Meters
Indication LED LED LED LED Led NOT provided
Max Switching Power 0.5 Watts 0.5 Watts 1 Watt 1 Watt 10 Watts
Operating Frequency 100 Hzs 100 Hzs 100 Hzs 100 Hzs 100 Hzs
Operating Voltage 10 - 30 V DC 110 / 220 Volts AC 10 - 30 V DC 10 - 30 V DC 10 - 30 V DC / 220 V AC
Output Logic / Load SPST - NO SPST - NO NPN - NO PNP - NO SPST - NO
Output Current 100 mA 100 mA 300 mA 300 mA 500 mA

5 mm Slot Sensor

Electronic Switches (I) P. Ltd; offers Fork / Slot Sensor with 5 mm slot width. Units operates on 10 - 30 V DC supply.

Model : IFS 051 / 052 / 053 / 054

Cylindrical Sensor 18 mm - 220 V AC

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 18 mm dia ABS Plastic housing. Unit operates directly on 230 AC or 110 Volts AC supply and offers TRIAC output. With this unit 220 volts AC or 110 volts AC coil of contactor can be directly controlled for any automatic interlock.

Model : IRD 181 AC / 182 AC ... 220 Volts

Anti Crane Collision Switch

Electronic Switches (India) Pvt. Ltd. offers Anti Crane Collision Switch for two over head cranes on the same rail. These units are installed on two cranes on the same rail approaching each other. With these units, the two cranes on the same rail will never collide with each other & thus the damage caused due to collision can be saved. The minimum distance in between two cranes will always be maintained, and the cranes will be able to move away from each other but not closer.

Unit has inbuilt Infra Red Transmitter & Receiver along with other processing circuit and power supply. It works on 110 VAC and 220 V AC supply and offers potential free relay contacts. These contacts are interlocked with the contacts for direction of motion towards each other. Set consists of a control unit and a reflector. Control unit is fixed on one Crane and the reflector on the other crane opposite to the control unit. Same way another control unit should be fixed on second crane and it's reflector on first crane, opposite to each other. Make sure that both the control unit should not be placed opposite to each other. Alignment of both the units is necessary, as the rays transmitted by the Transmitter will be reflected back by the Reflector. A Laser Alignment Tool is provided for perfect alignment of control unit and reflector.

The reflected beam will be picked up by the receiver when both the cranes come closer. When the two cranes come within the range, the moving crane will be stopped immediately. This range can be adjusted for single set point, as required. For two set points, one can be adjusted to get an alarm at required distance and another can be set to stop the crane at required distance.

Model : ACC 03 / 10 / 102 / 15 / 20

Rectangular Sensors 50x55 Mm

Electronic Switches (I) P. Ltd; offers retroreflective Scan Sensor in Rectangular housing with 1 mtr. range. Reflector is used to direct the beam from Transmitter to Receiver, both of which are housed together. This type is specially designed for applications where space is at a premium. Sensor operates on 10 - 30V DC supply. Sensitivity adjustment provided for adjusting the range

Model : IRX 11/2 , IRX 13/4 .... 1 Mtr. Range

100 mm Slot Sensor

Electronic Switches (I) P. Ltd; offers Fork / Slot Sensor with 100 mm slot width. Units operates on 10 - 30 V DC supply. Sensitivity adjustment pot provided for adjusting the sensitivity of the sensor.

Model : IFS 1001 / 1002 / 1003 / 1004

Cylindrical Sensors 12 mm

Electronic Switches (I) P. Ltd; offers Through Scan Sensor ( Trasnsmitter and Receiver type ) in 12 mm dia; plated Brass housing with 3 m. range. Units operates on 10 - 30 V DC supply.

Model : IRB 121 / 122 / 123 / 124 ... 3 mtr. Range

Capacitive Proximity

Electronic switches (i) p. Ltd; offers capacitive proximity switches which are used to sense non - metallic material such as plastic, paper, rubber, etc. These sensor are non flush type and it has range adjustment pot.

Capacitive proximity switch - DC / AC type

Cylindrical Sensors 12mm

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 12 mm dia Brass housing with 100 mm range Units operates on 10 - 30 V DC supply.

Model : IRD 121 / 122 / 123 / 124

Electronic Switch for Printing Machine

Electronic Switches offers a Safety Guard specially designed for operator's safety for Paper Cutting Machine. Unit consists of a Control unit, Transmitters, Receivers. Three models are available with 3 Beams, 4 Beams and 6 Beams to suit different requirements. Unit works on 220 VAC supply and offers potential free relay change over contacts for further interlock. Status of each beam is indicated by LED and each beam can be by-passed separately when required. Total Guard By-pass switch is also provided on control unit so it can be electrically by-passed when required within no time. The transmitters and receivers should be installed opposite to each other and control box at any convenient location. Transmitters and receivers can be interchanged among themselves. Sensors and control unit has plug in connectors for easy connections. Unit is unaffected by mains power fluctuations. When any beam is blocked the output relay is operated which stops the further action.

Following models are available:

Model : PCM 03
Model : PCM 0450 CW

Applications:

This Safety Guard has wide applications in machine tools, Paper Cutting machines, Special purpose machines for safety etc;

Sliver Brake Sensor

Electronic Switches (I) P. Ltd; offers Sliver Brake Detection sensor for textile application. set consists : Through Scan Sensor ( Transmitter and Receiver type )and controller with 230V Ac Supply Following are the models.

Model : SLB 02 / SLB 05 / SLB 10

Rectangular Sensor 50 x 55 mm

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in rectangular housing with 300 mm and 1 m. range. Units operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust the range.

Model :IDX 11/2/3/4 and IDX 31/2/3/4

Flame Sensor

Electronic Switches (I) P. Ltd; offers Flame sensor in 18 mm diameter housing and operates on 10 - 30V DC supply. Flame sensor is useful for sensing Yellow flame.

Model : FAS 183

Power Packs / Controller

Electronic Switches (I) P. Ltd; offers various types of power packs / controller for different applications in processes and factory automation.


Model : PPD (STD) / T 1 T2 / LOG / 2SD / 4SD

Following are the models :

PPD (STD) :

Unit available with single sensor and single relay output ( Suitable for NPN or PNP sensor)

PPDT1 T2 :

Unit available with single sensor and single relay output with ON Delay / OFF delay from 0 - 10 Sec. adjustable by potentiometer.( Suitable for NPN or PNP sensor)

PPD(LOG) :

  • Multiple function user selectable PPD offers suitable for PNP sensor.
  • Unit is available with single sensor and single relay output. For first input signal relay is ON and second input signal relay is OFF. Again next signal relay is ON and for second signal relay is OFF. This is known as BISTABLE logic
  • Unit is available with Two sensors and single relay output. By one sensor relay is ON and by another sensor relay is OFF. This is known as BISTABLE logic
  • Unit is available with Two sensors and single relay output. Output is ON when Both sensors gets activates. This is known as AND logic
  • Unit is available with Two sensors and single relay output. Output is ON when any one sensor activates. This is known as OR logic
  • Unit works as Hopper level controller with Two sensors and single output relay when lower level sensor activates, output is ON and Upper level sensor activates output is OFF. This way it keeps working.

PPD2 SD / 4 SD :


Unit available for 2 / 4 sensors with 2 / 4 separate outputs suitable for PNP sensor.

Cylindrical Switches 18 mm

Electronic Switches (I) P. Ltd; offers Through Scan Sensor (Emitter and Receiver type ) in 18 mm dia; Brass or ABS Plastic housing with 3 / 10 /20 m. range. Units operates on 10 - 30 V DC supply. Sensitivity adjustment is available to Transmitter to adjust the range.

Model : IRB 03/10/20 .... 3 mtr./10 mtr./ 20 mtr. Range

Extended Through Scan Sensor

Electronic Switches (I) P. Ltd; offers Through Scan Sensor ( Trasnsmitter and Receiver type ) in extended type. Units operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust the range. It is available in 6 / 8 / 12 mm extended housing with range 500 mm / 500 mm / 1 mtr. resp. Amplifier is in M 18 housing.

Model : EXB 06 / EXB 08 / EXB 12

Sensing Range 500mm/ 500mm / 1 mtr.
Supply Voltage 10 - 30 V DC
Output Current 200 mA (max)
Drop across switch 0.6 - 0.7 volts
No load current 5-10 mA
Housing Plated Brass
Dimensions Amplifier - 18 D x 65 L mm
 Extended Sensor 6/8/12 D x 30L mm

Rectangular Sensor 50 x 55 mm

Electronic Switches (I) P. Ltd; offers Through Scan Sensor ( Transmitter and Receiver type ) in Rectangular, ABS plastic housing with 3/10/20 m. range. Units operates on 10 - 30 V DC supply.

Electronic Switch 18 mm -100 mm

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 18 mm dia Brass or ABS Plastic housing with 100 mm range. Unit operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust the range.

Model : IRD 181 / 182 / 183 / 184 - 100 mm Range

Cylindrical Sensor 18 mm -500 mm

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 18 mm dia Brass or ABS Plastic housing with 300 mm range. Unit operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust the range.

581/ 582 / 583 / 584 - 500mm Range

Registration Mark Sensor

Electronic Switches (I) P. Ltd; offers Mark sensor is for sensing black mark on white background and white mark on black background. Units operates on 10 - 30 V DC supply.

Model : MS 10 / MS 20

20 mm Slot Sensor

Electronic Switches (I) P. Ltd; offers Fork / Slot Sensor with 20 mm slot width. Units operates on 10 - 30 V DC supply. Sensitivity adjustment pot provided for adjusting the sensitivity of the sensor.

Model : IFS 031/2 , 033/4

50 mm Slot Sensor

Electronic Switches (I) P. Ltd; offers Fork / Slot Sensor with 50 mm slot width. Units operates on 10 - 30 V DC supply. Sensitivity adjustment pot provided for adjusting the sensitivity of the sensor.

Model : IFS 501/2, 503/4

Cylindrical Sensor 18 mm - 4 Wire

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 18 mm dia Brass or ABS Plastic housing with 100 mm. Units operates on 10 - 30 V DC supply. Sensitivity adjustment is available in the unit to adjust the range. It is 4 wire type sensor with output NPN or PNP and NO or NC.

Model : IRD 180 - 4 wire

Cylindrical Sensor 18 mm

Electronic Switches (I) P. Ltd; offers retro reflective Scan Sensor in 18 mm dia; ABS plastic / Brass housing with 300 mm. Reflector is used to direct the beam from Transmitter to Receiver, both of which are housed together. This type is specially designed for applications where space is at a premium.

Model : IRR 181/182/183/184 ... 300 mm

Cylindrical Sensor 30 mm

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in 30 mm dia Brass housing with 1 m and 2 m. range. Unit operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust the range.

Model :IRD 311/2/3/4 and 321/2/3/4

Extended Diffuse Scan Sensor

Electronic Switches (I) P. Ltd; offers Diffuse Scan Sensor in extended type. Amplifier model is in 18 mm diameter housing and extended sensor which is connected through cable with 6 or 8 or 12 mm housing. Sensor operates on 10 - 30 V DC supply. Sensitivity adjustment is available to adjust required range.

Model : EXD 06 / EXD 08 / EXD 12

Window Sensor

Electronic switches offers specialized window to sense small objects. This sensor operates on multiple beam technique. Supply to this sensor is 12 V DC. it can sense a small object ( approx. 2mm x 6mm ).
Distance between two sensors is 5.5mm.

It has an array of multiple emitter and receiver which forms continuous screen. When small object passes through it will give output

Model : WFS 503

Zero Speed Switch - Din Rail

The Zero speed switches scan s for speed when it receives the signal . When speed drops to zero and output (potential free) is energised, it can be applied for triping the system or giving warning signal. The Control unit is available in DIN rail housing.

Applicable to :

Steel plant, Thermal power station, Tiles factory, fertilizer plant, blowers for heating system, coal factory, cement factory, food industries, textile industries, automobile industries etc.

This is simple form of Zero Speed Switch. Proximity Sensor senses rotation of roller and gives pulses to control unit. Output relay is actuated when incoming pulses from proximity are stopped. This model does not display rotating RPM of object however it offers output relay changeover at preset value. The unit has two independently adjustable delay to be adjusted by user with potentiometer. Speed delay can be set from 1 sec. to 10 sec. Approx.
Following are the models

Model : ZSP 101 - When motor is rotating output will remain OFF, if stopped output gets ON.

Model : ZSP 102 - When motor is rotating output will remain ON, if stopped output gets OFF.

Diffused Scan Sensor

Specifications:

  • Cylindrical 12 mm
  • Cylindrical 18 mm -100mm
  • Cylindrical 18 mm -300mm
  • Cylindrical 18 mm -500mm
  • Cylindrical 18 mm - 4 wire
  • Cylindrical 18 mm - 220 V AC
  • Cylindrical 30 mm
  • Rectangular 50 x 55 mm
  • Extended Diffuse Scan

Slot Sensor

Specifications:

  • Slot sensors
  • 3 mm slot sensor
  • 5 mm slot sensor
  • 20 mm slot sensor
  • 50 mm slot sensor
  • 100 mm slot sensor

Retro Reflective Sensors

Slim, space-saving SJ Series relay socket. Release lever allows for easy maintenance in narrow spaces.

Through Scan Sensor

Specifications:

  • Cylindrical 12 mm
  • Cylindrical 18 mm
  • Rectangular 50x55 mm
  • Extended through scan

Proximity Sensor

Specifications:

  • Inductive proximity
  • Capacitive proximity
  • Analog proximity
  • Cylinder position sensor

Safety Light Curtain

Specifications:

  •  For hand / body protection
  •  For printing machine
  •  For finger protection
  •  For mechanical press
  •  Diffuse area sensor


Inductive Proximity Switch

INDUCTIVE PROXIMITY SWITCH DC / AC Models

Electronic Switches (I) P. Ltd; offers Inductive proximity switches for sensing Ferrous material. These are used for automation.

Inductive Proximity Switch DC Type

Used for Counting / Position Sensing of various objects in Bulk Material handling, Automobile, Steel Plants, Fertilizer, Cement, Engineering, Machine Tools, etc

Industries DC Models Diameter :          06/08/12/18/30/36 mm
Length :                                                        65 mm,
Range :                                                         1/1/4/5/8/10/15mm
Output :                                                         PNP / NPN and NO / NC
Housing :                                                      Plated Brass
Supply :                                                        10 - 30V DC
Flush and Non Flush Type

Inductive Proximity Switch AC Type
Diameter :                                                   12/18/30/36 mm,
Length :                                                        65 mm,
Range :                                                        2/4/5/8/10/15 mm
Output :                                                       Solid State
Housing :                                                     Plated Brass
Supply :                                                       90 - 230V AC
Flush and Non Flush Type

Infra Red Sensor

Specifications:

  •     Slot sensors
  •     Diffused scan sensors
  •     Through scan sensors
  •     Retro reflective sensors
  •     Special sensors

Power Sensor for Finger Protection

Model : FX 1011

Electro-Arts offers this model especially for Small Presses, Hammers, Crimping machines, Riveting machines, Spot
welding machines etc; where the risk of operator’s finger meeting with an accident is very high. The product uses latest
micro controller technology and offers maximum safety and protection to the fingers of operator.

The set consists of Transmitter, Receiver and a control unit with connecting cables. Control unit operates on 230 V AC supply.
And offers relay output. The protected height is 100-300 mm and the sensing range is 300-1500 mm.

The Transmitter & Receiver units are housed in 36 x 42 mm housing and are to be mounted in the working area, opposite to
each other. In finger guard model, pitch is kept very low. Sensors can be placed vertical on the working table or can be fixed
to any stand or brackets or wall as may be suitable. These sensors are connected to control unit through connecting cables
with round connector. Guard by-pass facility is provided on the control unit through terminals. So with help of these terminals
(with external switch), output can be bypassed when ever required

Electronic Switches for Hand / Body Protection

Electronic Switches for Hand / Body Protection:

Electronic Switches offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. These are available in two types. Parallel Beam ( LC : type II beam ) and Cross Beam ( LX : type x beam ). For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.

Following models are available:

  • Easy to install & may be mounted in any position with non-critical alignment between sensors.
  • Switches are provided for blanking / by-passing individual channels.
  • Sensors can be connected directly to PLC for further interlock
  • Barrier operates on micro controller based cyclic scanning photo-electric infra-red techniques.
  • Various barrier range heights are available from covering 100 mm to 1000 mm . Higher covering heights    available upon request.
  • Use of solid state components & special construction technique ensures that barrier Is not affected by    normal vibrations & shocks.
  • For Sensors, connections are provided through plug in connectors.
  • Self Checking Circuitry continuously monitors failure of any of the beam in the system and stops the    machine if failure detected.
  • LED Indications are provided for status indication of each channel
  • LED indication for output and sense.

3mm Slot Sensor

Model : IFS 031/2 , 033/4

Analog Proximity Switch

Model : AN 1807

Electronic Switches (I) P. Ltd; offers . Analog Sensors are self contained, general purpose, solid-state devices designed to sense the presence of ferrous and nonferrous metal objects without touching them. These special versions provide a 0...10V sourcing analog output proportional to the sensing distance It is used in Light-duty packaging applications Automotive welding equipment, Food-processing plants,
Looking for Electro Art Sensor ?
© Super Service
Desktop Site Back to top