EAPL Electronic Timer

Preset Counter

Counters Features:

  • Din sized enclosure for panel mounting.
  • Front / Rear reset facility provided.
  • Hold / Restart facility available.
  • Over Voltage protection.
  • Input signal from proximity switch( NPN/PNP) or limit switch (Potential free)
  • Digital display with up counting

 

Specifications:

Model Function Source Voltage Time Range
CT5 Preset Counter 85V to 270V AC/DC 1 to 99,999 counts
H3CT-5U Preset Counter 85Vto 270V AC/DC 1 to 99,999 counts

Digital Timer

With years of experience in the respective domain, we are engaged in distributing, trading and providing services for Digital Timers. Based on latest technology, these timers have din sized enclosure for panel mounting. In order to ensure better performance, the device program enable and disable facility for all parameters programmed except time duration. Besides, hold / restart facility is provided to perform perfectly during power failure.

 

Features:

  • Digital Display for set value and process value

  • Front and Rear reset cum start facility

 

  • Over voltage protection for C3PT/E3PT

B-Series Electronic Timer

Specifications:
Model Function Source Voltage Time Range
B1DCA-X Cyclic Adjustable
ON-OFF timer
X-Version 0.6 sec to 60 mins
B1DCA-T Cyclic Adjustable
ON-OFF timer
110V AC/240V AC 0.1 sec to 10 hrs
B1DS Star- Delta timer 440 V AC 0.6 secs to 60 secs
B1DH-Q Power-OFF delay timer 110 V AC/DC -240 V AC/220 V DC 6 sec to 60secs
B1DF ON delay timer with instant contact 240V AC /110VAC 0.3 sec to 30 min

Phase Monitoring Device

Specifications:
Model Function Source Voltage Output
PMD-01 Phase Monitoring Device 440 V AC, 3 phase 3 wire 1 c/o relay*
PVMD Phase and Voltage Monitoring Device 3 Phase 4 wire 1 relay c/o
PVIMD Phase , Voltage and Current Monitoring Device 3 phase 4 wire 1 relay c/o
PVMD-G Phase and Voltage Monitoring Device 3 Phase 4 wire 1 relay c/o
PVIMD-G Phase,Voltage and Current Monitoring Device 3 phase 4 wire 1 relay c/o

Annunciator

Available with us is a quality range of Annunciator, which has ABS enclosures and super bright SMD LEDs for fault indication. Our procuring agents source these products from reliable vendors of the market, who develop the product using latest techniques. Since the device has wide operating voltage range, over voltage protection is also provided for the safety.

 

Features:

 

  • Potential free inputs.NO/NC selectable

  • Relay output - Trip/Alarm selectable

  • Wide voltage range

  • Cascading of multiple units possible

  • Manual Reset + Repeat Alarm

  • Indication through AC fail relay

 

Specifications:

Model Function Input No. of windows
02/12/13 Programmable fault annunciator 85V to 270V AC/DC 12
M2-16 Programmable fault annunciator 85V to 270V AC/DC 16
M2-24 Programmable fault annunciator 85V to 270V AC/DC 24
M2-32 Programmable fault annunciator 85V to 270V AC/DC 32
M2-8 Programmable fault annunciator 85 V to 270V AC/DC 8
M2-6 Programmable fault annunciator 85 V to 270V AC/DC 6
M2-4 Programmable fault annunciator 85 V to 270V AC/DC 4
M2-2 Programmable fault annunciator 85 V to 270V AC/DC 2
M2-8 Programmable fault annunciator 18 to 90V AC/DC 8
M2-6 Programmable fault annunciator 18 to 90V AC/DC 6
M2-4 Programmable fault annunciator 18 to 90V AC/DC 4
M2-2 Programmable fault annunciator 18 to 90V AC/DC 2

Hour Meter

Specifications:
Model Function Source Voltage Specifications
         HM600       Hour Meter 3V DC(1.5VX2AA)        Click Here


Series Temperature Controller

Specifications:
Model Function Source Voltage Time Range Output
ST-10M1*$ Sequential Switching 10 channels 85 to 270 V AC/DC 0.1 sec to 99 hrs 59 mins Relay output
ST-10M2*#$ Sequential Switching 10 channels 85 to 270 V AC/DC 0.01 sec to 99 hrs 59 mins Triac output
ST-6M1*$ 6 channel Sequential timer 85 to 270 V AC/DC 0.1 sec to 99 hrs 59 mins Relay output
ST-4M1 4 Channel. Sequential Timer 240 V AC 0.1sec to 1hr Relay output
ST-15M2*#$ 15 Channel Sequential Timer 85V AC to 270 VAC/DC 0.01 sec to 99 hrs 59 mins Triac output
S1D-C8M3 8 channel Combination timer 85 to 270 V AC/DC 1 sec to 99 hrs 59 mins Relay output

S-Series Electronic Timer

Specifications:
Model Function Source Voltage Time Range Output
ST-10M1*$ Sequential Switching 10 channels 85 to 270 V AC/DC 0.1 sec to 99 hrs 59 mins Relay output
ST-10M2*#$ Sequential Switching 10 channels 85 to 270 V AC/DC 0.01 sec to 99 hrs 59 mins Triac output
ST-6M1*$ 6 channel Sequential timer 85 to 270 V AC/DC 0.1 sec to 99 hrs 59 mins Relay output
ST-4M1 4 Channel. Sequential Timer 240 V AC 0.1sec to 1hr Relay output
ST-15M2*#$ 15 Channel Sequential Timer 85V AC to 270 VAC/DC 0.01 sec to 99 hrs 59 mins Triac output
S1D-C8M3 8 channel Combination timer 85 to 270 V AC/DC 1 sec to 99 hrs 59 mins Relay output

Tachometer

Features:

  • Portable, Light weight, Strong and Elegant ABS Enclosure .
  • Micro controller based design with World class Indian s/w.
  • LCD Display for DT2001B.
  • Non-Contact Sensing through reflected light beam.
  • Battery Operated (1.5V X4)AA size.
  • Input sensing indication through LED.
  • Memory facility to retain measured value.
  • Calibration Certificate provided Along with Tachometer-
  • Traceable to National and International Standard.

 

Specifications:

 

Model Function Range Source Voltage
T2001B Digital LCD tachometer Hand Held 1 to 99,999 RPM 
(with one reflecting mark)
6V DC 
( 1.5V X 4 AA Size Batteries)

Phase Monitoring Device

Avail from us a technologically advanced range of Phase Monitoring Device at market leading rates. Sourced from reliable vendors of the market, the range we offer are developed at par with the set industry norms. Our range is widely appreciated for its high performance and provided with auto/manual reset facility.

 

Auto / Manual reset facility

  • Relay contact for Tripping

PMD - 01:

  • Din sized enclosure for screw / track

  • Dimension: 45 x 75 X116mm (W x H x D)


PVMD, PVMD-G, PVIMD & PVIMD-G:

  • Din sized enclosure for Panel mounting

  • Trip Delay time can be selected individually for each parameter

  • Unwanted parameter can be bypassed

  • LED indication for relay status

  • Type of fault display whenever fault occurs

  • Dimension:96 x96 X112mm (W x H x D)

  • PVMD, PVIMD: Flush/panel mounting

  • PVMD-G,PVIMD-G: Dinrail mounting

 

Specifications:

 

Model Function Source Voltage Output
PMD-01 Phase Monitoring Device 440V AC, 3 phase 3 wire 1 c/o relay*
PVMD Phase and Voltage Monitoring Device 3 Phase 4 wire 1 relay c/o
PVIMD Phase , Voltage and Current Monitoring Device 3 phase 4 wire 1 relay c/o
PVMD-G Phase and Voltage Monitoring Device 3 Phase 4 wire 1 relay c/o
PVIMD-G Phase,Voltage and Current Monitoring Device 3 phase 4 wire 1 relay c/o

 

Power Supply

With the assistance of our experienced professionals, we are engaged in trading and distributing a wide range of Power Supply. The range available with us is manufactured at par with the set industry norms at our vendor’s premises. Appreciated for its compact design and light weight, the product has over voltage protection and short circuit/over load protection. Besides, these products have SMPS for working under noisy power environment.

 

Features
 

  • Versatile & easy snap-on mounting on DIN rail

  • Wide Input voltage range

  • Very low ripple and noise

  • Regulated output with fine tuning

  • High efficiency and better load regulation

 

Specifications:

 

Model Function Source Voltage Output
MS-01
(24V DC)
Power Supply Module 192 to 264V AC 24V DC/1A
MS-02 
(24V DC)
Power Supply Module 170 to 300V AC 24V DC/2.1A
MS-03 Power Supply Module 170 to 300V AC 24V DC/5.0A
MS-05 Power Supply Module 170 to 300V AC 5V DC/1A
MS-01
(15V DC)
Power Supply Module 192 to 264V AC 15V DC,1A
MS-02
(12V DC)
Power Supply Module 170 to 300V AC 12V DC/4.2A
MS-02
(5V DC)
Power Supply Module  170 to 300V AC 5V DC/6.0A
MS-02
(15V DC)
Power Supply Module 170 to 300V AC 15V DC/2.1A

A-Series Electronic Timer

Specifications:
Model Function Source Voltage Time Range
A1D1(CSA) ON delay Timer 240V AC 0.3 secs to 30 mins
A1D1-X(CSA) ON delay Timer X-Version 0.3 secs to 30 mins
A1D1-X(60M) ON delay Timer X-Version 0.6 secs to 60 mins
A1DE-X Interval timer X-Version 0.3 secs to 30 mins
A1DN-X(CSA) Auxilary Relay timer X-Version 20 m secs
A1DCS-X Cyclic timer Equal
ON-OFF
X-Version 0.6 secs to 60 mins
A1D1(9-30V) ON delay timer 9V - 30V DC 0.3 secs to 30 mins
A1DA Signal OFF delay timer 110V/240V AC 0.3 secs to 30 mins
A1DS Star delta timer 240V AC/110V AC 0.6 secs to 60 secs
A1D1(SR) ON delay timer with single range 12V DC 18 secs to 180 secs
A1D1(WB) ON delay timer with wide band 266-456V AC 3 secs to 30 secs
A1DH-1 Power OFF delay timer 240V AC 18 secs to 180 secs

H-Series Electronic Timer

Specifications:
Model Function Source Voltage Time Range
H3D1 Multi function timer (8terminals) Screw Type X-Version 0.3Secs to 60Mins
H1D1-X Multi-function timer (11 Pin) plug in type X-Version 0.3 Secs to 60Mins
H1DA-X Signal OFF delay timer (11 Pin) plug in type X-Version 0.6 Secs to 60Mins
H1DT-10 ON Delay(11Pin) plug in type X-Version 1 Secs to 10 Secs
H1DT-30 ON Delay(11Pin) plug in type X-Version 3 Secs to 30 Secs
H1DT-60 ON Delay(11Pin) plug in type X-Version 6 Secs to 60 Secs
H4DT-10 ON Delay(8pin) plug in type X-Version 1 Sec to 10 Secs
H4DT-30 ON Delay(8pin) plug in type X-Version 3 Secs to 30 Secs
H4DT-60 ON Delay(8pin) plug in type X-Version 6 Secs to 60 Secs

Reliable Rate Flow Indicator

Technical Data:

Housing Cast aluminum, weather proof, stoving enamel painted, suitable for back panel/wall mounting
Cable Entry 3 Nos. ½” BSP / NPT
Tolerable ambient temp -20°C to +60°C
Power supply 90 to 260V AC 50Hz, and 24V DC
Power consumption 3.5VA (approx.)
Utilizable span 10 to 4500 PF
Zero setting range 30 to 280 PF
Indication range 50% to 150% on multipurpose 5 digit 0.5” LED
Accuracy +/- 1% FSD
Switching Hysterisis 1% in single point switching and 1 to 98% selectable in 2 point Pump control logic.
Programming interface 5 Push Button Keys
Analog output 4 to 20 ma galvanically isolated into Max 1K Ohm load for 24V DC user supply. Max 800 Ohm for internal isolated supply of 18 to 22 V DC.
Output 3 sets of potential free change over contacts rated at 6A, 230V, AC, 50Hz for non-inductive loads
Switching delay Programmable up to 99 sec.
Fail-safe High/Low field programmable
Dimensions 180 x 180 x 85 mm

PRE-Amplifier (electronic insert) LDC117:

Housing Plastic with electronics potted, mounted in Probe Head
Operating Temp. - 20 to +80 deg. C
Supply 18 V DC at 8ma (approx.) derived from evaluation unit
Measuring Frequency 250Hz to 20 KHz reverse frequency measurement

Series Temperature Controller

Specifications:
Model Function Input Output
H3TX-Ua ON-OFF temp. controller SELF TUNE
temp. controller
J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC
H3TX-2U ON-OFF/ SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
H3TX-2A-U(PT100) ON-OFF Temperature controller with alarm PT100 1 C/O contact rated for5 @ 250VAC/28V DC resistive load for each set point
H3TX-2H-U 2 Setpoint temperature Controller(Heater type) J/K/PT100 1C/O contact rated for 5A @ 250V AC/28V DC resistive load for each set point
H3TX-S-U ON-OFF temp.Controller
SELF TUNE temp.controller
J/K/PT100 SSR drive(12V DC, 20 mA)

Preset Counter

Specifications:
Model Function Source Voltage Time Range
CT5 Preset Counter 85V to 270V AC/DC 1 to 99,999 counts
H3CT-5U Preset Counter 85Vto 270V AC/DC 1 to 99,999 counts


Design & Specifications are subject to change without notice.

User is recommended to confirm the suitability of EAPL product range for intended application.

EAPL is not responsible for consequential damage arising out of use of its products.

Note: If you do not get the required model with any dealer for what so ever reason,kindly contact us immediately for helping you out.


Series Temperature Controller

Specifications:
Model Function Input Output
TX7-Ua ON-OFF temperature controller SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
TX7-2U ON-OFF temperature controller SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
TX7-2A-U 2 Set Point Temp. Controller (Alarm Type) J/K/PT100 1c/o contact rated for 5A @ 250V AC/28V DC resistive load for each set point.
TX7-2H-U 2 Set point temperature controller(Heater type) J/K/PT100 1C/O Contact rated for 5A@250V AC/28V DC resistive load for each set point
TX7-S-U ON-OFF temperature Controller SELF TUNE temperature controller J/K/PT100 SSR drive (12VDC,20 mA)

Digital Timers

Specifications:
Model Function Source Voltage Time Range
E3PT Digital ON delay timer with Instant contact 85V to 270V AC/DC 0.1S-99H 59 M
H3PT-MU Multifunction Timer 85V to 270 VAC/DC 0.1S to 99H 59M
C3PT-MU Multifunction Timer 85V to 270 VAC/DC 0.1S to 99H 59M
Model Function Source Voltage Time Range
E3PT Digital ON delay timer with Instant contact 85V to 270V AC/DC 0.1S-99H 59 M
H3PT-MU Multifunction Timer 85V to 270 VAC/DC 0.1S to 99H 59M
C3PT-MU Multifunction Timer 85V to 270 VAC/DC 0.1S to 99H 59M

Temperature Controller

Features:

  • Universal Input(J,K,PT-100) Selectable.
  • Wide Voltage Range.
  • ON/OFF or Self-Tuned Function Selectable.
  • Single/double set point.
  • Over Voltage Protection
  • Compensation of offset features available in H3TX-Ua
  • User Friendly Programming
  • Indication for sensor,function and relay status.
  • Program enable/disable for sensor,function, compensation features in H3TX-Ua. Dimension 48x48x115

 

Specifications:

 

Model Function Input Output
3TX-Ua ON-OFF temp. controller SELF TUNE 
temp. controller
J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC
H3TX-2U ON-OFF/ SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
H3TX-2A-U(PT100) ON-OFF Temperature controller with alarm PT100 1 C/O contact rated for5 @ 250VAC/28V DC resistive load for each set point
H3TX-2H-U 2 Setpoint temperature Controller(Heater type) J/K/PT100 1C/O contact rated for 5A @ 250V AC/28V DC resistive load for each set point
H3TX-S-U ON-OFF temp.Controller
SELF TUNE temp.controller
J/K/PT100 SSR drive(12V DC, 20 mA)

Additional Information:
  • Item Code: H3TX

Electronic Timer

Features:

  • Din sized enclosure for panel / Track / Screw mounting.
  • Front terminal protective cover for safety.
  • Knob lock to protect from unintentional change of time setting.
  • LED indication for timing in progress.
  • Large transparent knob for precise time setting.
  • Model H1DA-X : Accepts any voltage from 12 VAC/DC to 220VAC/DC as signal between command contacts for timing initiation.

 

Specifications:

 

Model Function Source Voltage Time Range
H1D1-X Multi-function timer (11 Pin) plug in type X-Version 0.3 Secs to 60Mins
H1DA-X Signal OFF delay timer (11 Pin) plug in type X-Version 0.6 Secs to 60Mins
H1DT-10 ON Delay(11Pin) plug in type X-Version 1 Secs to 10 Secs
H1DT-30 ON Delay(11Pin) plug in type X-Version 3 Secs to 30 Secs
H1DT-60 ON Delay(11Pin) plug in type X-Version 6 Secs to 60 Secs
H4DT-10 ON Delay(8pin) plug in type X-Version 1 Sec to 10 Secs
H4DT-30 ON Delay(8pin) plug in type X-Version 3 Secs to 30 Secs
H4DT-60 ON Delay(8pin) plug in type X-Version 6 Secs to 60 Secs

Additional Information:
  • Item Code: H-series

Temperature Controller

Features:

  • Universal Input(J,K,PT-100) Selectable.
  • Wide Voltage Range.
  • ON/OFF or Self-Tuned Function Selectable.
  • Single/double set point.
  • Over Voltage Protection
  • Compensation offset feature available in TX7-Ua User Friendly Programming through increment/decrement button (TX7-ua)
  • Indication for sensor,function and relay status.
  • Program enable/disable for sensor,function, compensation features in TX7-Ua. Dimension 72x72x128.5

 

Specifications:

 

Model Function Input Output
TX7-Ua ON-OFF temperature controller SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
TX7-2U ON-OFF temperature controller SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
TX7-2A-U 2 Set Point Temp. Controller (Alarm Type) J/K/PT100 1c/o contact rated for 5A @ 250V AC/28V DC resistive load for each set point.
TX7-2H-U 2 Set point tempetrature controller(Heatertype) J/K/PT100 1C/O Contact rated for 5A@250V AC/28V DC resistive load for each set point
TX7-S-U ON-OFF temperature Controller SELF TUNE temperature controller J/K/PT100 SSR drive (12VDC,20 mA)

Additional Information:
  • Item Code: TX7

Temperature Controller

Features:

  • Universal Input(J,K,PT-100) Selectable.
  • Wide Voltage Range.
  • ON/OFF or Self-Tuned Function Selectable.
  • Single/double set point.
  • Over Voltage Protection
  • Compensation of offset features available in EX9-Ua
  • User Friendly Programming
  • Indication for sensor,funtion and relay status.
  • Program enable/disable for sensor,function,hystersis,compensation features in EX9-Ua. Dimension 96x96x112

 

Specifications:


Model Function Input Output
X9-Ua ON-OFF temperature controller SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
EX9-2U ON-OFF / SELF TUNE temperature controller J/K/PT100 1 C/O contact rated for 5A@250V AC/28V DC resistive load
EX9-2A-U 2 Set point temperature
controller(alarm type)
J/K/PT100 1C/O Contact rated for 5A@250V AC/28V DC resistive load for each set point
EX9-2H-U 2 Set point temperature
controller(Heater type)
J/K/PT100 1C/O Contact rated for 5A@250V AC/28V DC resistive load for each set point
EX9-S-U ON-OFF/ Self tune (Single Display) J/K/PT100 SSR drive of 12V,20mA

 


Additional Information:
  • Item Code: EX-9

Time Switch

Features:

  • Multiple program time switch with 4 Switchings per day.
  • Battery for Real Time Clock in 24 hour format.
  • LED indication for relay status.
  • LCD display for real time clock.
  • Manual over ride facility.
  • Clock time setting enable/disable.
  • Program enable/disable (only in TS203B)
  • Model TS-203 suitable for front panel and Model TS-203B suitable for Din rail.
  • Application: Street Lighting , Advertising Boards etc.
  • Dimensions: 72 X 72 X 84mm (W x H X D) for TS-203 130 X 86 X 65mm (W x H X D) for TS-203B

 

Specifications:

 

Model Function Output Source Voltage
TS 203 Digital Daily Time Switch 1 c/o 16A Relay 240V AC
TS 203B Digital Daily Time Switch 1 c/o 16 A Relay 240V AC

Electronic Timer

Our expertise in the respective domain and in-depth process understanding helps us provide technologically advanced range of Electronic Timer. Suitable for screw mounting (except ST4-M1), these timers have 7 segment display indication for channel and timing operation (except ST-4M1). These products are available in various technical specifications such as dimensions and sizes to suit the application needs of our clients.

 

S-Series Features

  • User friendly programming for ON/OFF time selection independently (except ST-4M1)

  • Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).

  • Type Of Start signal : ST-6M1 / ST-10M2 / ST-10M1  - pulse, ST-15M2 / ST-4M1 - continuous

  • S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.


Specifications:

  • Application: Bag filters, Dust collectors, Water treatment plants etc.

  • Dimensions : ST-10M1 / ST-6M1 / ST-10M2 / ST-15M2 / S1D-C8M3 - 200X130X45mm , ST4-M1: 110 x 86 x 68 mm

 

ModelFunctionSource VoltageTime RangeOutput
ST-10M1*$Sequential Switching 10 channels85 to 270 V AC/DC0.1 sec to 99 hrs 59 minsRelay output
ST-10M2*#$Sequential Switching 10 channels85 to 270 V AC/DC0.01 sec to 99 hrs 59 minsTriac output
ST-6M1*$6 channel Sequential timer85 to 270 V AC/DC0.1 sec to 99 hrs 59 minsRelay output
ST-4M14 Channel. Sequential Timer240 V AC0.1sec to 1hrRelay output
ST-15M2*#$15 Channel Sequential Timer85V AC to 270 VAC/DC0.01 sec to 99 hrs 59 minsTriac output
S1D-C8M38 channel Combination timer85 to 270 V AC/DC1 sec to 99 hrs 59 minsRelay output

Additional Information:
  • Item Code: S-Series

Hour Meter

Capitalizing on our in-depth process knowledge, we are involved in trading a wide range of Hour Meter. These are sourced from reliable vendors of the market. Used across various industries and sectors, the range we offer is provided with LCD display for better visibility. Manufactured at par with the set industry norms at our vendor’s premises, the meters we offer can be operated by battery.

 

Features:

 

  • LCD Display

  • Battery operated

  • 0-99,999 Hours

  • External reset contacts

Looking for EAPL Electronic Timer ?
© Super Service
Desktop Site Back to top